J. H. Behrmann and A. Kopf, Textures and Microfabrics in Fine-Grained Muds and Mudstones from Site 808, Nankai Accretionary Prism, 1993.
DOI : 10.2973/odp.proc.sr.131.106.1993

P. Blum, Physical properties handbook: a guide to the shipboard measurement of physical properties of deep-sea cores, ODP Tech. Note, vol.//, 1997.
DOI : 10.2973/odp.tn.26.1997

G. J. Borradaile and B. Henry, Tectonic applications of magnetic susceptibility and its anisotropy, Earth-Science Reviews, vol.42, issue.1-2, pp.49-93, 1997.
DOI : 10.1016/S0012-8252(96)00044-X

W. Brückmann, K. Moran, and E. Taylor, Acoustic Anisotropy and Microfabric Development in Accreted Sediment from the Nankai Trough, Proc. ODP, Sci. Results, pp.221-233, 1993.
DOI : 10.2973/odp.proc.sr.131.121.1993

W. F. Brace, J. B. Walsh, and W. T. Frangos, Permeability of granite under high pressure, Journal of Geophysical Research, vol.36, issue.8, 1968.
DOI : 10.1029/JB073i006p02225

C. J. Bray and D. E. Karig, Physical Properties of Sediments from the Nankai Trough, Deep Sea Drilling Project Leg 87A, Sites 582 and 583, Init. Repts, DSDP, p.p, 1986.
DOI : 10.2973/dsdp.proc.87.128.1986

K. M. Brown, A. Kopf, M. B. Underwood, and J. L. Weinberger, Compositional and fluid pressure controls on the state of stress on the Nankai subduction thrust: A weak plate boundary, Earth and Planetary Science Letters, vol.214, issue.3-4, 2003.
DOI : 10.1016/S0012-821X(03)00388-1

T. Byrne and D. Fisher, Evidence for a weak and overpressured d??collement beneath sediment-dominated accretionary prisms, Journal of Geophysical Research, vol.300, issue.B6, pp.9081-9097, 1990.
DOI : 10.1029/JB095iB06p09081

F. A. Dahlen, Noncohesive critical Coulomb wedges: An exact solution, Journal of Geophysical Research: Solid Earth, vol.11, issue.B12, 1984.
DOI : 10.1029/JB089iB12p10125

F. A. Dahlen, Critical taper model of fold-and-thrust belts and accretionary wedges. Annual review of earth and planetary sciences 18, pp.55-99, 1990.

D. Davis, J. Suppe, and F. A. Dahlen, Mechanics of fold-and-thrust belts and accretionary wedges, Journal of Geophysical Research, vol.69, issue.B2, pp.1153-1172, 1983.
DOI : 10.1029/JB088iB02p01153

X. Deng and M. Underwood, Abundance of smectite and the location of a plate-boundary fault, Barbados accretionary prism, Geological Society of America Bulletin, vol.113, issue.4, pp.495-507, 2001.
DOI : 10.1130/0016-7606(2001)113<0495:AOSATL>2.0.CO;2

D. C. Drucker, An Analysis of the Mechanics of Metal Cutting, Journal of Applied Physics, vol.20, issue.11, pp.1013-1021, 1949.
DOI : 10.1063/1.1698265

V. Feeser, K. Moran, and W. Bruckman, Stress-regime-controlled yield and strength 52, 1993.

P. Henry and X. Le-pichon, Fluid flow along a decollement layer: A Model applied to the 16??N section of the Barbados Accretionary Wedge, Journal of Geophysical Research: Solid Earth, vol.91, issue.B4, pp.6507-6528, 1991.
DOI : 10.1029/90JB02694

F. Hrouda, Magnetic anisotropy of rocks and its application in geology and geophysics, Geophysical Surveys, vol.283, issue.5, 1982.
DOI : 10.1007/BF01450244

S. Hunze and T. Wonik, Compaction in the Nankai and Barbados accretionary prisms: New insights from logging-while-drilling data, Geochemistry, Geophysics, Geosystems, vol.78, issue.7, pp.10-1029, 2007.
DOI : 10.1029/2006GC001277

D. E. Karig, Reconsolidation Tests and Sonic Velocity Measurements of Clay-Rich Sediments from the Nankai Trough, Proc. ODP, Sci, 1993.
DOI : 10.2973/odp.proc.sr.131.127.1993

K. W. Kim, W. Y. Lee, and H. C. Sin, A finite-element analysis of machining with the tool edge considered, J. Mater. Process. Tech, vol.86, pp.45-55, 1999.

A. Kopf and K. M. Brown, Friction experiments on saturated sediments and their implications for the stress state of the Nankai and Barbados subduction thrusts, Marine Geology, vol.202, issue.3-4, pp.193-210, 2003.
DOI : 10.1016/S0025-3227(03)00286-X

L. Pichon, X. Henry, and P. , Erosion and accretion along subduction zones: a model of evolution, Proc. Kon. Ned. Akad. v. Wetensch 95, pp.297-310, 1992.

L. Pichon, X. Henry, P. Lallemant, and S. , Accretion and Erosion in Subduction Zones: The Role of Fluids, Annual Review of Earth and Planetary Sciences, vol.21, issue.1, pp.307-331, 1993.
DOI : 10.1146/annurev.ea.21.050193.001515

K. Liu and S. N. Melkote, Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process, International Journal of Mechanical Sciences, vol.49, issue.5, pp.650-660, 2007.
DOI : 10.1016/j.ijmecsci.2006.09.012

G. F. Moore, T. H. Shipley, P. L. Stoffa, D. E. Karig, A. Taira et al., Structure of the Nankai Trough Accretionary Zone from multichannel seismic reflection data, Journal of Geophysical Research, vol.160, issue.B6, pp.8753-8765, 1990.
DOI : 10.1029/JB095iB06p08753

G. F. Moore, A. Taira, A. Klaus, L. Becker, B. Boeckel et al., New insights into deformation and fluid flow processes in the Nankai Trough accretionary prism, 2001.

H. Mikada, G. F. Moore, A. Taira, K. Becker, J. C. Moore et al., synthesis: Deformation and fluid flow processes in the Nankai Trough accretionary prism, Proc. ODP, Sci. Results, pp.1-26, 190196.

J. C. Moore, A. Klaus, N. L. Bangs, B. A. Bekins, C. J. Bucker et al., Consolidation patterns during initiation and evolution of a plate-boundary decollement zone: Northern Barbados accretionary prism, Geology, vol.26, issue.9, pp.811-814, 1998.
DOI : 10.1130/0091-7613(1998)026<0811:CPDIAE>2.3.CO;2

J. C. Moore, J. C. Moore, A. Klaus, N. L. Bangs, B. A. Bekins et al., Synthesis of results: logging while drilling, northern Barbados accretionary prism, Proc. ODP,Sci. Results, 2000.
DOI : 10.2973/odp.proc.sr.171A.101.2000

J. K. Morgan, D. E. Karig, and A. Maniatty, The estimation of diffuse strains in the toe of the western Nankai accretionary prism: A kinematic solution, Journal of Geophysical Research, vol.131, issue.B4, pp.7019-7032, 1994.
DOI : 10.1029/93JB03367

J. K. Morgan and D. E. Karig, D??collement processes at the Nankai accretionary margin, southeast Japan: Propagation, deformation, and dewatering, Journal of Geophysical Research: Solid Earth, vol.16, issue.43, pp.221-215231, 1995.
DOI : 10.1029/95JB00675

J. K. Morgan and M. V. Ask, Consolidation state and strength of underthrust sediments and evolution of the d??collement at the Nankai accretionary margin: Results of uniaxial reconsolidation experiments, Journal of Geophysical Research, vol.18, issue.B8, pp.10-1029, 2004.
DOI : 10.1029/2002JB002335

A. Nur, G. Mavko, J. Dvorkin, and D. Galmudi, Critical porosity: A key to relating physical properties to porosity in rocks. The Leading Edge, pp.357-362, 1998.

W. H. Owens, Magnetic Fabric Studies of Samples from Hole 808C, Nankai Trough, Proc. ODP, Sci. Results, 1993.
DOI : 10.2973/odp.proc.sr.131.130.1993

H. Raimbourg, Y. Hamano, S. Saito, M. Kinoshita, and A. Kopf, Acoustic and mechanical properties of Nankai accretionary prism core samples, Geochemistry, Geophysics, Geosystems, vol.97, issue.4, pp.10-1029, 2010003169.
DOI : 10.1029/2010GC003169

URL : https://hal.archives-ouvertes.fr/insu-00627809

S. Saito and D. Goldberg, Compaction and dewatering processes of the oceanic sediments in the Costa Rica and Barbados subduction zones: estimates from in situ physical property measurements, Earth and Planetary Science Letters, vol.191, issue.3-4, pp.283-293, 2001.
DOI : 10.1016/S0012-821X(01)00403-4

E. J. Screaton, D. M. Saffer, P. Henry, and S. Hunze, Porosity loss within the underthrust sediments of the Nankai accretionary complex: Implications for overpressures, Geology, vol.30, issue.1, pp.19-22, 2002.
DOI : 10.1130/0091-7613(2002)030<0019:PLWTUS>2.0.CO;2

Y. Shi and C. Wang, High pore pressure generation in sediments in front of the Barbados Ridge Complex, Geophysical Research Letters, vol.11, issue.11, pp.773-776, 1985.
DOI : 10.1029/GL012i011p00773

Y. Shi and C. Wang, Generation of high pore pressures in accretionary prisms: Inferences from the Barbados Subduction Complex, Journal of Geophysical Research, vol.78, issue.B8, pp.8893-8910, 1988.
DOI : 10.1029/JB093iB08p08893

S. Scientific, P. Moore, G. F. Taira, A. Klaus, A. Becker et al., Leg 190 Summary, 2001.

T. H. Shipley, P. L. Stoffa, and D. F. Dean, Underthrust sediments, fluid migration paths, and mud volcanoes associated with the accretionary wedge off Costa Rica: Middle America Trench, Journal of Geophysical Research, vol.66, issue.1, pp.8743-8752, 1990.
DOI : 10.1029/JB095iB06p08743

J. F. Steurer, M. Underwood, and H. Mikada, Clay Mineralogy of Mudstones from the Nankai Trough Reference Sites 1173 and 1177 and Frontal Accretionary Prism Site 1174, 2005.
DOI : 10.2973/odp.proc.sr.190196.211.2003

E. B. Sunderland and J. K. Morgan, Microstructural Variations in Sediments from the Toe of the Nankai Accretionary Prism: Results of Scanning Electron Microscope Analysis, 2004.
DOI : 10.2973/odp.proc.sr.190196.212.2004

A. Taira, I. Hill, . Firth, U. Berner, W. Briickmann et al., Sediment deformation and hydrogeology of the Nankai Trough accretionary prism: Synthesis of shipboard results of ODP Leg 131, Earth and Planetary Science Letters, vol.109, issue.3-4, pp.431-450, 1992.
DOI : 10.1016/0012-821X(92)90104-4

H. J. Tobin and D. M. Saffer, Elevated fluid pressure and extreme mechanical weakness of a plate boundary thrust, Nankai Trough subduction zone, Geology, vol.37, issue.8, pp.679-682, 2009.
DOI : 10.1130/G25752A.1

K. Ujiie, T. Hisamitsu, and A. Taira, Deformation and fluid pressure variation during initiation and evolution of the plate boundary d??collement zone in the Nankai accretionary prism, Journal of Geophysical Research, vol.39, issue.47, p.2398, 2003.
DOI : 10.1029/2002JB002314

M. B. Underwood, K. Pickering, J. M. Gieskes, M. Kastner, and K. Orr, Sediment Geochemistry, Clay Mineralogy, and Diagenesis: A Synthesis of Data from Leg 131, Nankai Trough, Proc. ODP, Sci. Results, 1993.
DOI : 10.2973/odp.proc.sr.131.137.1993

S. Uyeda and H. Kanamori, Back-arc opening and the mode of subduction, Journal of Geophysical Research, vol.7, issue.B3, pp.1049-1106, 1979.
DOI : 10.1029/JB084iB03p01049

V. Huene, R. Scholl, and D. W. , Observations at convergent margins concerning sediment subduction, subduction erosion, and the growth of continental crust, Reviews of Geophysics, vol.8, issue.57, pp.279-316, 1991.
DOI : 10.1029/91RG00969

G. K. Westbrook, M. J. Smith, J. H. Peacock, and M. J. Poulter, Extensive underthrusting of undeformed sediment beneath the accretionary complex of the Lesser Antilles subduction zone, Nature, vol.6, issue.5893, pp.625-628, 1982.
DOI : 10.1038/300625a0

K. S. Woon, M. Rahman, F. Z. Fang, K. S. Neo, and K. Liu, Investigations of tool edge radius effect in micromachining: A FEM simulation approach, Journal of Materials Processing Technology, vol.195, issue.1-3, pp.204-211, 2008.
DOI : 10.1016/j.jmatprotec.2007.04.137

J. Wu and Z. Liu, Modeling of flow stress in orthogonal micro-cutting process based on 56 strain gradient plasticity theory, Int. J. Adv. Manuf. Technol, 2009.