Design and fabrication of a fast-response and low-energy input micro igniter - LAAS-Gestion de l'énergie Accéder directement au contenu
Article Dans Une Revue Sensors and Actuators A: Physical Année : 2024

Design and fabrication of a fast-response and low-energy input micro igniter

Résumé

In this study, we innovatively combine direct ink writing (DIW) and physical vapor deposition (PVD) to fabricate a novel micro igniter with fast-response and low-energy input characteristics. The igniter comprises a 5×5 mm² metal film bridge with gold contact pads. The metallic resistance is fabricated using a series of photolithography, metal deposition, and lift-off processes. After evaluating titanium and chromium as the resistive filament, titanium was selected due to its superior reactivity when in contact with CuO leading to reduced ignition energy. Onto the resistive titanium layer, either thermite multilayer films and/or energetic inks are deposited to achieve a head-to-head comparison of ignition characteristics. We show that igniters powered by (CuO/Ti)5 bilayers and Al/CuO/PVDF as energetic ink demonstrate the equivalent ignition performance as reactive (CuO/Ti)5 multilayered igniter. The ignition delay and ignition energy are below 1 ms and 2 mJ, respectively, while the flash intensity is approximately one decade higher than what is typically achieved with conventional micro-igniters. Furthermore, its ignition behaviour can be readily adjusted by altering the constituents of the fuel/oxidizer or adjusting the ratio of multilayer/inks, thereby allowing for easy adaptation of the micro-igniter to meet the diverse requirements of various applications.
Fichier principal
Vignette du fichier
revised Manuscript SNA.pdf (831.82 Ko) Télécharger le fichier
revised Manuscript (1).docx (10.16 Mo) Télécharger le fichier
revised Manuscript.docx (10.16 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04616048 , version 1 (18-06-2024)

Identifiants

Citer

Tao Wu, Vidushi Singh, Baptiste Julien, Maria-Isabel Mendoza-Diaz, Fabien Mesnilgrente, et al.. Design and fabrication of a fast-response and low-energy input micro igniter. Sensors and Actuators A: Physical , 2024, 376, pp.115573. ⟨10.1016/j.sna.2024.115573⟩. ⟨hal-04616048⟩
0 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More